Raws li cov khoom siv hlau, cov kab ntawv qhia yooj yim rau xeb, thiab tom qab xeb, nws yog qhov nyuaj rau kev tswj xyuas. Yog li peb yuav tsum ua li cas? Cov hauv qab no yog qee cov lus qhia txog kev kho xeb ntawm cov kab ntawv qhia. Kuv vam tias yuav muab koj cov ntaub ntawv siv.
1. The stop time is greatly shortened, so that the linear rail is in a state of moving and working at all times, and rust is prevented by increasing the frequency and efficiency of use.
2. It would be great if the scalar of the linear guide can be strictly controlled. As long as the scalar is within the specified range, the service life is generally relatively long. At the same time, it would be perfect if the noise interference on the linear guide can be reduced.
3. When working in a high-speed environment, try to reduce the temperature rise of the motor as much as possible, and do not let the motor sling oil. If the power consumption can be reduced, it would be better to protect the motor.
4. Yog tias koj xav ntxuav nws, ces cov khoom siv disassembled yuav tsum tau muab faib kom ntau li ntau tau, vim tias muaj ntau txoj hauv kev los ntxuav cov khoom sib txawv, kev tu kom zoo thiab kev tu huv. Nyob rau tib lub sijhawm, thov ua tib zoo saib tsis txhob muab cov lus qhia linear discretely. Nyob rau hauv lub thawv, cov hlau mesh yuav tsum tau siv los ua ib qho tsis ua ntej, kom cov khoom tsis tuaj yeem nkag mus rau hauv cov khoom qias neeg hauv lub thawv.
5. If you are working at low temperature, it would be great if you can ensure the spirituality of linear guide start and the spirituality of work in advance, and at the same time, try to keep the output power as small as possible in a low temperature environment.
6. Keep the environment as clean as possible when using it. If the surroundings can be clean and clean so that small dust does not enter the space near the linear guide, then the probability of wear can be greatly reduced, and vibration and noise can also be reduced.
In short, the maintenance of linear guides requires patience and persistence. Doing the above points can prevent rust and improve the maintenance effect.
